L1 Bay2-specific setup
Connect Ethernet cable to a network port underneath the printer. Lower right port in the right panel should be used (it is labeled "Slicer").
Network configuration details
| Configuration parameter | Value | Comment |
|---|---|---|
| IP | x | Dedicated to the workstation; can be used in Bay 2 area; The IP address is registered in the Bay 2 scanner host for DICOM transfer |
| Subnet Mask | x | |
| Gateway | x |
Test connection from MRI host computer
To check the connection, press Ctrl+Esc on the MRI host to pop up windows menu, choose "Run...," type
cmd
and hit Enter. Once the command terminal opens, type:
ping x
If the network is configured properly, you will see responses like:
Reply from x bytes=32 time<1ms TTL=64
If there is an issue, the terminal shows network unreachable error.